Votronic LCD voltmeter S

Accurate measurement of the on-board voltage provides safety, as the battery voltage can give an initial indication of the battery's state of charge. Damaging deep discharges of the on-board battery are also detected immediately and can be remedied by immediate charging. Abnormally strong voltage drops during consumer operation usually indicate an aged battery. excessive charging by unregulated chargers or other unsuitable charging sources can be detected and thus avoided.

This digital meter displays alternatively the voltage of the on-board and the starter battery. The voltages are displayed as exact numerical values. The additional bar display works in the range of 10.5 to 15 volts and thus displays the most interesting range of battery voltage from deep discharge to maximum charging voltage clearly and at a glance

During the installation of the device, 12V or 24V operation is set once for this function. With 24V operation, the range then corresponds to 21.0 to 30.0 volts. A mixed operation of e.g. 24V starter circuit and 12V supply circuit is also possible, as this setting is done separately for the starter and on-board battery. The connection is made by screw terminals on the back of the device

Matching the VOTRONIC module system, the LCD voltmeter S fits in with the other display modules both optically and mechanically (uniform height 85 mm) and the low installation depth of only 22 mm allows it to be mounted in almost any position. The display is backlit in white (switchable) if required and is very easy to read even from greater distances and in all lighting conditions.

Details

• Operating voltage (battery): 12 and 24 V
• Current consumption: 1 mA
• Current illumination (can be switched off) max. 30 mA
• Measuring range display: 8 - 32 V
• Dimensions (W x H x D): 80 x 85 x 25 mm

Scope of delivery

• 1 pc. LCD voltmeter S (display)
• 4 pcs. fixing screws
• 1 pc. Instruction manual
• 1 pc. Drilling template