Pioneer Color Miniature Camera CA-BC.012

This high-quality, miniature colour camera helps you reverse safely. The very small, pivoting housing allows flexible selection of the mounting position. Mounting is easy and the camera is suitable for connection to a Pioneer navigation system or moniceiver. With an edge length of just over 2 cm and a 160 degree viewing angle, the camera is perfect for mounting in low locations, such as near the waste water tank or license plate. 20 m cable for connection to the navigation system or moniceiver included.

Hint:
Despite the robust housing, this camera should be handled with care. Use only mild detergents and do not use high-pressure cleaners. The camera has no controls. Refer to the manual of the navigation system or media centre to which the camera is connected for further operating instructions.

Technical data

• 1/4" CMOS image sensor for 380 TV lines
• Light sensitivity: 1 LUX
• Resolution (pixels): PAL: 720 (H) * 576 (V), NTSC: 7206 (H) * 480 (V)
• Housing colour: Black
• Water and system tightness: IP68
• Diagonal angle of view: 160°
• Power supply: 12 Volt DC voltage
• Horizontal angle of view: 120
• Power consumption: max. 125 mA
• Vertical angle of view: 90°
• Temperature range operation: -30° C to +65° C
• Dimensions (W x H x D): 21.5 x 21.5 x 21.5 mm
• Temperature range Storage: -40°C to +85° C