Product details
Reliable | Extensive |
Precise |
Product description
The robust SW-300 sine wave inverter reliably and precisely converts an input voltage of 12 V DC into a true sine wave AC voltage of 230 V/50 Hz. Independent of the public power grid, even highly sensitive consumers as well as consumers with increased starting current can be operated in a stable and absolutely trouble-free manner.
Details
Technical data
Input:
Due to the microprocessor-controlled electronics, continuous monitoring and control of the most important operating parameters, such as input voltage and frequency, is fully automatic. This ensures the constant stability of the output voltage.
Continuous power 300 W - peak output power 600 W
Especially with loads that require a high inrush current, the start does not always run smoothly. For this reason, the SW-300 is designed to provide twice the continuous output power for a short time.
To determine the appropriate inverter, you need your total power requirement. This is made up of the sum of the power (W or VA) of the individual loads. We recommend that you allow for a power reserve of 30 - 40 % upwards.
Power start function for loads with high inrush current
The SW inverter is also equipped with the power start function.
Advantage: Consumers with high inrush or starting current are controlled several times in quick succession with maximum output power of the inverter, thus facilitating reliable starting of powerful consumers.
E-approval: Suitable for fixed installation in vehicles
The Sinus inverters meet the legal requirements of the ECE regulation and thus have the E-certification. They are suitable for permanent installation in all vehicles with road approval, whether passenger cars, commercial vehicles or other vehicles with 12 V on-board voltage
Extensive protection functions
SW series inverters operate absolutely reliably and safely even under the toughest conditions. As standard, they are protected against overload, short circuit and overheating. An imminent deep discharge of the battery is indicated by optical prewarning (LED) and prevented by automatic shutdown.
Two output sockets
Plug type: F, C and C
The Sinus inverter is equipped with two output sockets as standard. A 230 V protective contact socket, suitable for plug types C (Euro plug) and F (Schuko plug), as well as a Euro socket (plug type C) are available for current draw.
Compact design, particularly light
Conventional inverters are often equipped with large ring transformers. As a result, they are heavy and unwieldy. In contrast, IVT microprocessor-controlled inverters work digitally thanks to innovative technology: large, heavy components are eliminated and replaced by small and powerful components. The valuable inner workings of the inverter are protected by a sturdy housing.
The SW series inverters can be used as a stand-alone unit or mounted on a wall.
Connection socket for remote on/off switch
An additional connection socket is available for connecting an external on/off switch. The scope of delivery includes a suitable plug with open ends for soldering on a switch
Suitable connection cable sets
For a safe and trouble-free operation of the SW inverters we recommend the use of the original IVT connection cables. These are exactly matched to the respective inverter in terms of conductor cross-section and cable length.
The high-quality workmanship of our connection cables guarantees a particularly long service life, even under heavy load. The cable set is already pre-assembled with suitable ring lugs and ferrules for connection to the battery and the inverter. All original IVT connection cables are supplied including fuse holder and 200 A fuse.
Scope of delivery
Sine wave inverter SW-300, 12 V Operating instructions DE, EN, FR, NL
Details
- True sine wave AC voltage 230 V/50 Hz
- High peak output power 600 W
- Extensive protection functions
- Power start function
- 2 output sockets
- E-approval
- Low power consumption
- Compact and lightweight design
- Connection for remote switch
Technical data
Input:
- Voltage range DC
- 11 - 15 V
- Rated input current
- 25 A
- Input current, max. 50 A
- Deep discharge protection voltage 10.5 V
- Deep discharge protection voltage, adjustable
- no
- Prewarning deep discharge protection switch-off 11.5 V
- Restart voltage 12.5 V
- Rated power consumption, no-load 3.5 W
- Output voltage AC (- 8 % / + 5 %)
- 225 V
- Frequency (± 1 %)
- 50 Hz
- Signal form sine wave
- Continuous output current 1.33 A
- Continuous output power
- 300 VA
- Peak output power (max. 2 s) 600 VA
- Power factor cos phi > 0.8
- Rated efficiency > 88
- Input connection Connection terminal 2 x M8
- Output connection 1 x protective contact socket
- 1 x Euro socket
- Suitable for plug type F, C
- Output connection USB (type A)
- no
- Temperature range -25 °C to +60 °C
- Sleep function no
- Standby function
- no
- Galvanic isolation (input/output)
- no
- Power start function yes
- E-approval yes
- Connection for remote switch yes
- Fan cooling no
Due to the microprocessor-controlled electronics, continuous monitoring and control of the most important operating parameters, such as input voltage and frequency, is fully automatic. This ensures the constant stability of the output voltage.
Continuous power 300 W - peak output power 600 W
Especially with loads that require a high inrush current, the start does not always run smoothly. For this reason, the SW-300 is designed to provide twice the continuous output power for a short time.
To determine the appropriate inverter, you need your total power requirement. This is made up of the sum of the power (W or VA) of the individual loads. We recommend that you allow for a power reserve of 30 - 40 % upwards.
Power start function for loads with high inrush current
The SW inverter is also equipped with the power start function.
Advantage: Consumers with high inrush or starting current are controlled several times in quick succession with maximum output power of the inverter, thus facilitating reliable starting of powerful consumers.
E-approval: Suitable for fixed installation in vehicles
The Sinus inverters meet the legal requirements of the ECE regulation and thus have the E-certification. They are suitable for permanent installation in all vehicles with road approval, whether passenger cars, commercial vehicles or other vehicles with 12 V on-board voltage
Extensive protection functions
SW series inverters operate absolutely reliably and safely even under the toughest conditions. As standard, they are protected against overload, short circuit and overheating. An imminent deep discharge of the battery is indicated by optical prewarning (LED) and prevented by automatic shutdown.
Two output sockets
Plug type: F, C and C
The Sinus inverter is equipped with two output sockets as standard. A 230 V protective contact socket, suitable for plug types C (Euro plug) and F (Schuko plug), as well as a Euro socket (plug type C) are available for current draw.
Compact design, particularly light
Conventional inverters are often equipped with large ring transformers. As a result, they are heavy and unwieldy. In contrast, IVT microprocessor-controlled inverters work digitally thanks to innovative technology: large, heavy components are eliminated and replaced by small and powerful components. The valuable inner workings of the inverter are protected by a sturdy housing.
The SW series inverters can be used as a stand-alone unit or mounted on a wall.
Connection socket for remote on/off switch
An additional connection socket is available for connecting an external on/off switch. The scope of delivery includes a suitable plug with open ends for soldering on a switch
Suitable connection cable sets
For a safe and trouble-free operation of the SW inverters we recommend the use of the original IVT connection cables. These are exactly matched to the respective inverter in terms of conductor cross-section and cable length.
The high-quality workmanship of our connection cables guarantees a particularly long service life, even under heavy load. The cable set is already pre-assembled with suitable ring lugs and ferrules for connection to the battery and the inverter. All original IVT connection cables are supplied including fuse holder and 200 A fuse.
Scope of delivery
Sine wave inverter SW-300, 12 V Operating instructions DE, EN, FR, NL
Features
Type of inverter | Pure sine-wave voltage |
Design | SW-300 |
Continuous output | 300 W |
Weight | 2,6 kg |
Dimensions (LxWxH) | 260 x 240 x 85 mm |
Output voltage | 225 V |
Input voltage | 12 V |
Peak output | 600 W |
Sockets | 1 Piece(s) |