IVT Shunt Solar Charge Controller 12 V / 24 V 6 A

The low-cost/high-performance 6 A shunt solar charge controller is ideal for small and medium-sized solar systems. It independently detects whether a 12 V or 24 V system is connected. The shunt charge controller is equipped with the essential control and protection functions necessary for gentle and safe charging and discharging of lead-acid and lead-gel batteries.

Details

• Pulse width modulated charge control (PWM)
• Suitable for lead-acid and lead-gel batteries
• Automatic voltage detection 12 V/24 V
• Controlled, temperature-dependent gassing
• With integrated temperature sensor
• Temperature compensated charging
• 12 V/24 V load output
• Low intrinsic current consumption
• LED battery status indicator
• Robust plastic housing
  

Technical data

• Battery system voltage 12 V / 24 V
• Supported battery types Lead-acid, lead-gel
• Type of charge control PWM shunt
• Max. Module power 55 W / 110 W
• Max. module voltage Module voltage 22 V / 35 V
• Max. Module / charge current 5 A
• Max. Load current 6 A
• Intrinsic current consumption 5 mA
• Fuse 6.3 A
• Temperature sensor yes
• Operating temperature range -25 °C to +50 °C
• Common ground potential (negative pole) no
• Switchable load output no
• Display LED
• Housing plastic

Charging parameters:

• Charging end voltage 13.7 V / 27.4 V
• End of charge voltage, gassing deactivated 14.1 V / 28.2 V
• Trickle charge 13.7 V / 27.4 V
• Trickle charge, gassing deactivated 14.1 V / 28.2 V
• Gassing active from 12.4 V / 24.8 V
• Gassing discharge 14.5 V / 29 V
• Temperature compensation 24 mV/K / 48 mV/K
• Temperature compensation, gassing 18 mV/K / 36 mV/K

Deep discharge protection load output:

• Cut-off voltage 11.1 V / 22.2 V
• Reset voltage 12.6 V / 25.2 V

Deep discharge and overcharge protection
The integrated deep discharge protection automatically switches off the load output as soon as the battery voltage drops below the minimum voltage. When the battery has been recharged and the battery voltage rises above the reset voltage, the solar charge controller automatically switches the load output back on. Overcharging is prevented thanks to integrated overcharge protection.

Automatic temperature compensation
The built-in temperature sensor ensures that the battery is charged as optimally as possible even when temperatures fluctuate. The end-of-charge and end-of-gassing voltages are dynamically adjusted to the prevailing temperature. At high temperatures, the final voltage is reduced, at low temperatures it is increased.

Gassing control
If a lead battery is operated for a longer period of time without controlled gas development, harmful acid layers can form. The solar charge controller eliminates or prevents the formation of acid layers by controlled gassing. This behavior is also temperature dependent and is compensated by the built-in temperature sensor.

LED display
Three LEDs provide information about impending deep discharge, the current state of charge and the operating status of the battery.

Scope of delivery
Shunt solar charge controller 12 V/24 V, 6 A Operating instructions in DE, GB, FR, NL