GOK Caramatic SafeDrive Plus RVS10/8 SV

Automatic safety gas pressure changeover unit for operating two-cylinder systems in motorhomes and caravans while driving, for direct connection to the gas cylinder, consisting of:

Central and switchover regulator with new pendulum solution and pressure gauge, hose lines and regulator holders.

Advantages and features:

• Gas supply while driving through integrated mechanical crash sensor with new pendulum solution, which shuts off the gas passage in the event of an accident.
• Advantages of the crash sensor with new pendulum solution:

faster and simpler commissioning and reset after response

more precise operation and therefore fewer malfunctions due to incorrect response behavior

commissioning possible without any problems, even if the recreational vehicle is in an inclined position

• simple retrofitting as the regulator does not need to be wall-mounted; it is fitted directly to the gas cylinder
• little space required for installation in the gas cylinder box
• Gas cylinder can also remain permanently open while driving
• greater safety, as the gas supply is interrupted directly at the gas cylinder in the event of an accident
• automatic switchover to the gas cylinder on the reserve side as soon as the gas cylinder on the operating side is empty
• cylinders can be changed without interrupting operation
• Gas non-return safety device: prevents the gas flow from leaking when changing cylinders
• Medium-pressure hose (rubber with textile insert; cold-resistant down to -30°C; hose dimensions 6.3 x 3.5 mm) G 3/8 LH-ÜM x G3/8 LMH-ÜM x 450 mm for connecting the two regulators
• Medium-pressure hose (rubber with textile insert; cold-resistant to -30°C; hose dimensions 6.3 x 3.5 mm) G 1/4 LH-ÜM x RVS 10x450 mm for connecting the two regulators
• suitable for connecting the Caramatic SafeControl remote display
• RVS 10/8 outlet connection is equipped as standard with a transition piece for connection to 8 mm pipes
• Brackets for safe storage of the regulator on the wall, e.g. when changing the gas cylinder

Conformity:

• Individual fittings with DIN-DVGW or DVGW type examination certificate or EU type examination certificate DGR

Technical data:

• Maximum permissible pressure: PS 16 bar
• Connections: Outlet: Central regulator: G 1/4 LH-KN

changeover regulator: G 3/8 LH-KN

• Outlet pressure: Central regulator: 30 or 50 mbar

changeover regulator: 120 mbar